Satya's blog - Puzz3D Titanic jigsaw puzzle

Feb 06 2006 18:16 Puzz3D Titanic jigsaw puzzle
Puzz3D makes nice three-dimensional jigsaw puzzles. You put together flat sections of foam-backed puzzle pieces, then assemble them into a 3-D model. So I bought the Titanic in December 2005 on eBay. The box arrived very nicely wrapped:
Titanic 3D box

The flat bits of the funnels, the hull and the deck were assembled in a couple of days. The brown bits are the deck pieces. The funnels, of which there are four -- I think one was decorative on the original -- are four-sided (oval in the original?) so there are sixteen of those sections, each assembed out of three pieces. Took a while to sort them out.
Titanic funnels Titanic hull assembly jigsaw Titanic hull assembly jigsaw

Here are all the flat bits completed, and assembly of the 3D model can begin.
Flat assembly done

Here's the 3D model. The hull is kinda hard to hold together while pressing bits of foam jigsaws. Hence the inner detail; the 'bulkhead' sections fore and aft as seen in the first picture below:
Titanic hull assembly Titanic hull assembly

And the fully-assembled Puzz3D Titanic model:
Complete Titanic Puzz3D Complete Titanic Puzz3D

(The links within the text contain more pictures, and the whole thing is of course in my picture gallery.)

Tag: model jigsaw